Conveyor Belting Supply Solutions
According to your different needs, producecustomized products
 |
Hanbelt
HB2420
| Quantity: | |
|---|---|
| Longitudinal thickness tensile strength | 800~1500(KN/m) | |||||||
| Longitudinal elongation <=2% | <=2% | |||||||
| Burner flame test | With cover: average<=3s, individual<=10s | |||||||
| Without cover: average<=5s, individual<=15s | ||||||||
| Surface resistant | <=3*108Ω | |||||||
| Rubber thickness top (mm) | 1.5~8 | |||||||
| Rubber thickness bottom(mm) | 1.5~4.5 | |||||||
Maintenance method
The feeding direction shall be along the running direction of the conveyor belt. In order to reduce the impact on the conveyor belt when materials fall, chute shall be adopted to reduce the falling distance of materials; In the material receiving section of the conveyor belt, the idler spacing shall be shortened and the buffer idler shall be used as the material leakage. The belt shall comply with the requirements and adopt a soft and appropriate baffle plate to prevent the baffle plate from being too hard and scratching the belt surface of the conveyor belt.
| Longitudinal thickness tensile strength | 800~1500(KN/m) | |||||||
| Longitudinal elongation <=2% | <=2% | |||||||
| Burner flame test | With cover: average<=3s, individual<=10s | |||||||
| Without cover: average<=5s, individual<=15s | ||||||||
| Surface resistant | <=3*108Ω | |||||||
| Rubber thickness top (mm) | 1.5~8 | |||||||
| Rubber thickness bottom(mm) | 1.5~4.5 | |||||||
Maintenance method
The feeding direction shall be along the running direction of the conveyor belt. In order to reduce the impact on the conveyor belt when materials fall, chute shall be adopted to reduce the falling distance of materials; In the material receiving section of the conveyor belt, the idler spacing shall be shortened and the buffer idler shall be used as the material leakage. The belt shall comply with the requirements and adopt a soft and appropriate baffle plate to prevent the baffle plate from being too hard and scratching the belt surface of the conveyor belt.
